If your new to sewing or piecing, this is a perfect project to try. If your center points don't line up, it's okay, they're covered with a button. There are only two pattern pieces for this project, so I do hope you sew some up.
The printable pattern pieces are here.
2 squares of cotton quilting fabric 10" x 10" each
1 yard ribbon
1 paper straw
1. Using the printed pattern pieces, cut 1 back and 4 triangles from one fabric and 4 triangles from your second fabric.
2. Start by sewing 4 sets of triangles together using two different fabrics. Make sure each set is sewn on the same side. This will insure that your pieces alternate fabrics.
3. Press the seams open. Sew two of the sets together to make a half circle. Sew the remaining two sets to make a second half circle.
4. Press open the seams. Now sew the two half circles together to make the complete front circle.
5. Align the front and back of the lollipop together with right sides facing inward. Take a 8" piece of ribbon, fold it in half and insert the loop side in between the two fabric layers. Leaving approximately 1/2" sticking out, pin into place. Sew around the outer edge using a 1/4" seam allowance. Leave a 2" gap for turning.
6. Clip the edges and turn right sides out. Fill with fiberfill.
7. Slide the paper straw approximately 2" into the opening of the lollipop. Hand stitch the opening closed. While you're stitching, sew through the paper straws one or two times to secure.
8. Using the remaining ribbon, tie a bow at the base of the lollipop around the straw. Tack stitch in place.
9. Sew a button to the center of the lollipop. While sewing it on, send your needle all of the way through to the back of the lollipop and pull the thread snug. Do this several times to secure it.
I've added some kits to the Jennifer Jangles Shop as well as my Etsy shop so you can have everything you need to make a lollipop decoration.
Visit my Website, Etsy Shop, Blog, Facebook